# What this PR does
## Which issue(s) this PR fixes
Fix:
- Schedule race condition
- No obvious way to close Rotation modal
https://github.com/grafana/oncall/issues/2802https://github.com/grafana/oncall/issues/2880
## Checklist
- [ ] Unit, integration, and e2e (if applicable) tests updated
- [ ] Documentation added (or `pr:no public docs` PR label added if not
required)
- [ ] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
# What this PR does
Make descriptions consistent for the `STEP_NOTIFY_IF_TIME` escalation
step (my [initial
assumption](https://github.com/grafana/oncall/pull/2729#discussion_r1281929984)
seems to be wrong and this can confuse users).
## Which issue(s) this PR fixes
https://github.com/grafana/support-escalations/issues/7164
## Checklist
- [x] Unit, integration, and e2e (if applicable) tests updated
- [x] Documentation added (or `pr:no public docs` PR label added if not
required)
- [x] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
Added "progress: plain" to show build log while building local env.
Otherwise it's just hanging with "RUN pip install" and you have no idea
what's going on.
# What this PR does
This PR adds a few tweaks to the integrations page
- prevent calling `/counters` on the integration page, instead call it
with `counters/[id]`
- call to `/counters` will be done only once when we load all the
integrations and prevent calling it again once we switch pages. Prior to
this change every page resulted in a call to `/counters`, and due to the
fact the request took on average `3-5s` it was being stalled by the
browser on subsequent calls.
- Call to `/connected_contact_points` is now conditioned by the
integration type
- No more page flicking when going back from integration page to the
list of integrations
- No more page flickering when switching pages in table view if there's
more requests ongoing
- Prevent discarding filters when going back from Integration view to
the table view
- Fixed routes not moving up/down
- Fixed routes flickering when adding/removing a route
These changes should result in slightly loader times because `/counters`
was time-consuming request, and less UX issues.
## Which issue(s) this PR fixes
- described at https://github.com/grafana/oncall/issues/2843 but
incompletely
## Checklist
- [ ] Unit, integration, and e2e (if applicable) tests updated
- [ ] Documentation added (or `pr:no public docs` PR label added if not
required)
- [ ] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
# What this PR does
Exclude the latest alert groups from escalation finished check to give
them time for building escalation snapshot
## Which issue(s) this PR fixes
https://github.com/grafana/oncall-private/issues/2028
## Checklist
- [x] Unit, integration, and e2e (if applicable) tests updated
- [x] Documentation added (or `pr:no public docs` PR label added if not
required)
- [x] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
Bumps [@adobe/css-tools](https://github.com/adobe/css-tools) from 4.0.1
to 4.3.1.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/adobe/css-tools/blob/main/History.md"><code>@adobe/css-tools</code>'s
changelog</a>.</em></p>
<blockquote>
<h1>4.3.1 / 2023-03-14</h1>
<ul>
<li>Fix redos vulnerability with specific crafted css string -
CVE-2023-26364</li>
</ul>
<h1>4.3.0 / 2023-03-07</h1>
<ul>
<li>Update build tools</li>
<li>Update exports path and files</li>
</ul>
<h1>4.2.0 / 2023-02-21</h1>
<ul>
<li>Add <a
href="https://github.com/container"><code>@container</code></a>
support</li>
<li>Add <a href="https://github.com/layer"><code>@layer</code></a>
support</li>
</ul>
<h1>4.1.0 / 2023-01-25</h1>
<ul>
<li>Support ESM Modules</li>
</ul>
<h1>4.0.2 / 2023-01-12</h1>
<ul>
<li><a
href="https://redirect.github.com/adobe/css-tools/issues/71">#71</a> :
<a href="https://github.com/import"><code>@import</code></a> does not
work if url contains ';'</li>
<li><a
href="https://redirect.github.com/adobe/css-tools/issues/77">#77</a> :
Regression in selector parsing: Attribute selectors not parsed
correctly</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/adobe/css-tools/commits">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
You can disable automated security fix PRs for this repo from the
[Security Alerts
page](https://github.com/grafana/oncall/network/alerts).
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# What this PR does
Follow up to #2888, rename `notify_user_async` celery task to
`notify_user_about_new_alert_group`.
## Checklist
- [x] Unit, integration, and e2e (if applicable) tests updated
- [x] Documentation added (or `pr:no public docs` PR label added if not
required)
- [x] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
# What this PR does
## Which issue(s) this PR fixes
https://github.com/grafana/oncall/issues/2897
## Checklist
- [x] Unit, integration, and e2e (if applicable) tests updated
- [x] Documentation added (or `pr:no public docs` PR label added if not
required)
- [x] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
# What this PR does
Set next step eta to None if escalation was paused (escalation step
"Continue escalation if num alerts > X in time window"
## Which issue(s) this PR fixes
https://github.com/grafana/oncall-private/issues/2028
## Checklist
- [x] Unit, integration, and e2e (if applicable) tests updated
- [x] Documentation added (or `pr:no public docs` PR label added if not
required)
- [x] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
# What this PR does
Closes#2722
## Checklist
- [x] Unit, integration, and e2e (if applicable) tests updated
- [x] Documentation added (or `pr:no public docs` PR label added if not
required)
- [x] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
# What this PR does
## Which issue(s) this PR fixes
## Checklist
- [ ] Unit, integration, and e2e (if applicable) tests updated
- [ ] Documentation added (or `pr:no public docs` PR label added if not
required)
- [ ] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
# What this PR does
If the same heartbeat is requested at a high rate it can create lock
contention when updating the timestamp in the DB. Moving to always run
update in task should free up the connection on the API server faster,
although the task might still see some lock wait time.
## Which issue(s) this PR fixes
## Checklist
- [ ] Unit, integration, and e2e (if applicable) tests updated
- [x] Documentation added (or `pr:no public docs` PR label added if not
required)
- [x] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
# What this PR does
Fixes an issue where OnCall could not parse Alerting configuration if
there was a route created without a receiver. The case where this comes
up is a notification policy matcher is defined for the purpose of
ignoring certain label values before continuing on to other matching
rules.
## Which issue(s) this PR fixes
## Checklist
- [ ] Unit, integration, and e2e (if applicable) tests updated
- [ ] Documentation added (or `pr:no public docs` PR label added if not
required)
- [x] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
# What this PR does
Update `next_step_eta` in alert group escalation snapshot when alert
group is silenced for period
## Which issue(s) this PR fixes
Fixes the issue related to [this
one](https://github.com/grafana/oncall-private/issues/2028)
## Checklist
- [x] Unit, integration, and e2e (if applicable) tests updated
- [x] Documentation added (or `pr:no public docs` PR label added if not
required)
- [x] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
---------
Co-authored-by: Joey Orlando <joey.orlando@grafana.com>
Co-authored-by: Joey Orlando <joseph.t.orlando@gmail.com>
# What this PR does
Address bug when a Shift Swap Request is accepted either via the web or
mobile UI, and the Slack message is not
updated to reflect the latest state.
## Checklist
- [x] Unit, integration, and e2e (if applicable) tests updated
- [x] Documentation added (or `pr:no public docs` PR label added if not
required)
- [x] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
# What this PR does
Fixes https://github.com/grafana/oncall/issues/1521 (see
https://github.com/unbit/uwsgi/issues/2299)
## Checklist
- [x] Unit, integration, and e2e (if applicable) tests updated
- [x] Documentation added (or `pr:no public docs` PR label added if not
required)
- [x] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
# What this PR does
Corrects escalation_policies public api docs
## Which issue(s) this PR fixes
https://github.com/grafana/oncall/issues/2746
## Checklist
- [x] Unit, integration, and e2e (if applicable) tests updated
- [x] Documentation added (or `pr:no public docs` PR label added if not
required)
- [x] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
---------
Co-authored-by: Joey Orlando <joey.orlando@grafana.com>
Bumps [uwsgi](https://github.com/unbit/uwsgi-docs) from 2.0.21 to
2.0.22.
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a
href="https://github.com/unbit/uwsgi-docs/commits">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
You can disable automated security fix PRs for this repo from the
[Security Alerts
page](https://github.com/grafana/oncall/network/alerts).
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
# What this PR does
Runs Telegram long polling to get updates.
It's enabled by setting `FEATURE_TELEGRAM_LONG_POLLING_ENABLED=True`.
That will disable webhook and run separate deployment for telegram long
polling.
Telegram long polling is not very HA mode, but it does not need to
expose webhook url to internet and simplifies telegram integration.
## Which issue(s) this PR fixes
closes#561
## Checklist
- [x] Unit, integration, and e2e (if applicable) tests updated
- [x] Documentation added (or `pr:no public docs` PR label added if not
required)
- [x] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
# What this PR does
When accessing the status endpoint using a mobile authentication token
do not use headers that would only be available if the request came from
Grafana.
## Which issue(s) this PR fixes
## Checklist
- [x] Unit, integration, and e2e (if applicable) tests updated
- [x] Documentation added (or `pr:no public docs` PR label added if not
required)
- [x] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
