# What this PR does
* Removes "Initializing plugin.." message during load
* Removes black screen when plugin loads
* Removes wait for syncs between OnCall and Grafana
* Deprecates GET /status, POST /sync, GET /sync in favour of single POST
/status
## Which issue(s) this PR fixes
## Checklist
- [ ] Unit, integration, and e2e (if applicable) tests updated
- [ ] Documentation added (or `pr:no public docs` PR label added if not
required)
- [ ] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
# What this PR does
- Improvement to the local development environment for the grafana
plugin
- Run initial yarn build inside the docker container with the same
version that is later used for periodic rebuilds
- Removes the requirement for having yarn/nodejs installed locally
- Using a named volume for storing the node_modules, so they are only
stored once
- Remove the yarn install step from the Dockerfile
- Ideally we store the node_modules only once inside the named volumes.
Currently they are stored times
- on the host system outside of dockerin grafana-plugins/node_modules
- inside the docker image
- inside the anonymous docker volume created at the start of a container
- update `node` to 18.16.0 (14.17.0 has reached end-of-life as of 3
weeks ago)
## Which issue(s) this PR fixes
## Checklist
- [X] ~Unit, integration, and e2e (if applicable) tests updated~ N/A
- [ ] Documentation added (or `pr:no public docs` PR label added if not
required)
- [ ] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
---------
Co-authored-by: Joey Orlando <joseph.t.orlando@gmail.com>
# What this PR does
Main Grouping&Templating PR fro all frontend changes:
Includes:
1. Integration table view
2. Integration form using Drawer component
3. Integration landing page with routes/escalation chains
4. Templates
5. Groupong
## Which issue(s) this PR fixes
https://github.com/grafana/oncall/issues/1620https://github.com/grafana/oncall/issues/1621
---------
Co-authored-by: Rares Mardare <rares.mardare@grafana.com>
Co-authored-by: Ildar Iskhakov <ildar.iskhakov@grafana.com>
This PR cuts GitHub Action build times from 14-15 minutes, down to just
under 7 minutes. It does this by:
- caching `grafana-plugins/node_modules` and `pip` dependencies based on
their respective dependency files (eg. `requirements.txt` &
`yarn.lock`). This step alone saves ~3 minutes.
- get rid of the "build-engine-docker-image" and
"backend-integration-tests" jobs in the old "Integration Tests"
workflow. This was split out this way so that we could build the backend
docker image once, upload the artifact, and then reuse it across the
backend and e2e tests. We no longer need these backend integration tests
because we are testing the same thing in the e2e tests. This saves ~45
seconds of having to upload the image artifact.
- few improvements within the integration tests themselves:
- move plugin configuration to the `globalSetup.ts`. This means that
every test does not need to check if the plugin has been configured
because it is done once before all the tests are run.
- cache the plugin frontend build. If your commit doesn't change
anything to `grafana-plugin/src` or `grafana-plugin/yarn.lock` it should
be safe to reuse a previously built/cached version of the plugin
frontend. This saves ~3 minutes
- cache playwright binaries/dependencies. Only re-install them if the
version of `@playwright/test` in `grafana-plugin/yarn.lock` changes.
This saves ~3 minutes.
**Other things to mention**
Once we refactor the `GSelect` component to not call the `onChange`
callback on every keyDown event (#1628), this should allow us to
parallelize the integration tests, and cut the time required to execute
the tests themselves in half
**What this PR does**:
Adds our first UI integration test using
[Playwright](https://playwright.dev/) and runs the test on CI. Right now
the test:
- logs into Grafana
- configures the plugin (if it isn't already)
- creates an OnCall schedule, where the current user will be OnCall
- creates an escalation chain to notify based on the newly created
OnCall schedule
- creates a webhook integration, attached to the created escalation
chain
- sends a demo alert for the new integration
- goes to the alert groups page and validates that the escalation step
to alert the OnCall user actually happened
Currently the Playwright tests are run against the 3 default headless
browsers, chromium, Firefox, and webkit. The CI job that runs these
tests is run as a matrix against 3 tagged versions of `grafana`; `main`,
`latest`, and `9.2.6`.
Secondly, it adds most of the logic for a second test which:
- logs into Grafana
- configures the plugin (if it isn't already)
- goes to the user's settings, verifies their phone number (using a tool
called [MailSlurp](https://www.mailslurp.com/))
- configures the current user's default escalation policy to send alerts
via SMS
- creates an escalation policy and configures it to send alerts to our
current user
- creates an integration and assigns the created escalation policy
- triggers a test alert + verifies that we receive the SMS alert text
(again, using MailSlurp)
**Which issue(s) this PR fixes**:
Closes#873
**Checklist**
- [x] Tests updated
- [ ] Documentation added (N/A)
- [ ] `CHANGELOG.md` updated (N/A)
# What this PR does
Fixed#672 so that we import the css as a whole and add it as a `style`
element, instead of relying on path location which can differ if url is
rewritten.
## Which issue(s) this PR fixes
#672
## Checklist
- [ ] Tests updated
- [ ] Documentation added
- [ ] `CHANGELOG.md` updated
# What this PR does
## Which issue(s) this PR fixes
Add cache to avoid heavy calculations to render working hours shades
## Checklist
- [ ] Tests updated
- [ ] Documentation added
- [ ] `CHANGELOG.md` updated
* Modify plugin.json to support RBAC role registration
* defines 26 new custom roles in plugin.json. The main roles are:
- Admin: read/write access to everything in OnCall
- Reader: read access to everything in OnCall
- OnCaller : read access to everything in OnCall + edit access to Alert Groups and Schedules
- <object-type> Editor: read/write access to everything related to <object-type>
- <object-type> Reader: read access for <object-type>
- User Settings Admin: read/write access to all user's settings, not just own settings. This is in comparison to User Settings Editor which can only read/write own settings
* update changelog and documentation (#686)
* implement RBAC for OnCall backend
This commit refactors backend authorization. It trys to use RBAC authorization if the org's grafana instance supports it, otherwise it falls back to basic role authorization.
* update RBAC backend tests
* add tests for RBAC changes
- run backend tests as matrix where RBAC is enabled/disabled. When RBAC is enabled, the permissions granted are read from the role grants in the frontend's plugin.json file (instead of relying what we specify in RBACPermission.Permissions)
- remove --reuse-db --nomigrations flags from engine/tox.ini
- minor autoformatting changes to docker-compose-developer.yml
* remove --ds=settings.ci-test from pytest CI command
DJANGO_SETTINGS_MODULE is already specified as an env var so this is just unecessary duplication
* update gitignore
* update github action job name for "test"
* RBAC frontend changes
* refactors the use of basic roles (ex. Viewer, Editor, Admin) use RBAC permissions (when supported), or falling back to basic roles when RBAC is not supported.
- updates the UserAction enum in grafana-plugin/src/state/userAction.ts. Previously this was hardcoded to a list of strings that were being returned by the OnCall API. Now the values here correspond to the permissions in plugin.json (plus a fallback role)
* changes per Gabriel's comments:
- get rid of group attribute in rbac roles
- remove displayName role attribute
- remove hidden role attribute
- add back role to includes section
* don't try to update user timezone if they don't have permission
* Get rid of installation token (for OSS installations)
This is done by being required to supply the grafana API URL as an
environment variable on the backend. Additionally, optionally an OnCall
API URL environment variable can be passed in to the frontend (this basically
allows completely skipping the need to configure anything).
- deduplicated a lot of the sync logic on the frontend + made
error message more useful and consistent
- Split PluginConfigPage component into several subcomponents
(making it easier to test each individual component)
- Moved RootWithLoader (from plugin/GrafanaPluginRootPage) into its own
subcomponent (making it easier to test)
- Added tests for pre-existing components that were touched:
- PluginConfigPage component (and its new subcomponents)
- state/plugin and state/rootBaseStore functions
- apps.grafana_plugin django app
Helm changes:
- add GRAFANA_API_URL to oncall.env
- some yaml autoformatting changes
- remove reference to python manage.py issue_invite_for_the_frontend --override
Co-authored-by: Joey Orlando <joseph.t.orlando@gmail.com>
* Modify `docker-compose-developer` configuration files, and `Makefile`
to support running everything in containers for local development
- Make use of the COMPOSE_PROFILES env var that is supported by
docker-compose to allow swapping-out/turning off certain docker-compose
services.
- add makefile cleanup command. Will remove all docker resources related
to running the project locally
- The "restart grafana container" issue, where users would need
to restart their grafana container when setting up the project for the
first time, is now fixed (make command now runs yarn build:dev before docker-compose startup;
this ensures grafana-plugin/dist is available for grafana container before it starts up)
- The DEVELOPER.md has been updated as well to reflect these new changes. It
has been moved to ./dev/README.md (and references to the old file have
been updated).
- The redis image that is referenced in the docker-compose files
has been pinned to v7.0.5 (latest version as of this commit) to avoid
any surprises w/ future releases.
- remove root .dockerignore in favour of individual .dockerignore files
in ./engine and ./grafana-plugin
* UI spring cleaning
- fix ~570 outstanding eslint warnings
- make eslint force user to correct warnings
- remove .css files that are not referenced
- remove dummy.tsx as it is not consumed anywhere
- remove a few functions that were "dead code" (ie. not consumed anywhere)
- remove commented out blocks of code that had no explanatory comments surrounding them
* add prettier to pre-commit configuration
* change ignoreRestSiblings to true
we have a few spots in the codebase where we destructure
an object key and then use something like ...restProps
setting this to true allows that
* upgrade from eslint 7.21.0 to 8.25.0
- add @grafana/eslint-config to dev dependencies and pre-commit eslint deps
- add @grafana/eslint-config peer dependencies to package.json
* fix remaining outstanding prettier warnings
* enable noUnusedLocals and noUnusedParameters and fix errors related to this
* make pre-commit complain about eslint warnings
* import from moment-timezone instead of moment
* fix react/display-name eslint warning
* add eslint-plugin-react-hooks to dev deps
this is a peer dependency from @grafana/eslint-config
* turn off react/prop-types
* temporarily turn off react-hooks/exhaustive-deps
add note that it will be turned back on and fixed in next PR
* fix unused import errors after rebase to dev
* fix more new prettier errors
* turn react/no-unescaped-entities eslint rule off
* address PR comment about useReducer
* remove includeTemplateGroup from src/components/AlertTemplates/AlertTemplatesForm.helper.tsx
* update arg typing for refreshPageError
* update handleSyncException typing
* fix strict equality in containers/IntegrationSettings/parts/Autoresolve.tsx
* enhance typing in components/AlertTemplates/AlertTemplatesForm.tsx
* revert small change per Maxim's comment
* Log (failed) attempt to notify a user with viewer role
* Remove https:// prefix from BASE_URL docker env var
* Fix cloud heartbeat name
* Polishing telegram
* Update docker-compose.yml
* Update plugin README (#48)
* Update README and screenshot, remove plop for build info since version is now displayed prominently
* Sign build
Co-authored-by: Michael Derynck <michael.derynck@grafana.com>
* Build actions (#38)
* Drone, github action changes
* Minor version updates
* Update frontend dependencies
* Re-enable unit test
Co-authored-by: Michael Derynck <michael.derynck@grafana.com>
* Revert stylelint version (#52)
* Revert stylelint version
* Build plugin as well as lint
* Build in previous step
Co-authored-by: Michael Derynck <michael.derynck@grafana.com>
* Update screenshot (#53)
Co-authored-by: Michael Derynck <michael.derynck@grafana.com>
Co-authored-by: Matias Bordese <mbordese@gmail.com>
Co-authored-by: Matvey Kukuy <Matvey-Kuk@users.noreply.github.com>
Co-authored-by: Innokentii Konstantinov <innokenty.konstantinov@grafana.com>
Co-authored-by: Matvey Kukuy <matvey@amixr.io>
Co-authored-by: Michael Derynck <michael.derynck@grafana.com>
