# What this PR does
Runs Telegram long polling to get updates.
It's enabled by setting `FEATURE_TELEGRAM_LONG_POLLING_ENABLED=True`.
That will disable webhook and run separate deployment for telegram long
polling.
Telegram long polling is not very HA mode, but it does not need to
expose webhook url to internet and simplifies telegram integration.
## Which issue(s) this PR fixes
closes#561
## Checklist
- [x] Unit, integration, and e2e (if applicable) tests updated
- [x] Documentation added (or `pr:no public docs` PR label added if not
required)
- [x] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
# What this PR does
- updates the GitHub Actions workflow to move the e2e tests into a
"[reusable
workflow](https://docs.github.com/en/actions/using-workflows/reusing-workflows#creating-a-reusable-workflow)"
which are run in two scenarios:
- all tests _except_ those annotated as `@expensive` are run against
`grafana/grafana:latest` on all feature branches
- all tests _including_ `@expensive` tests are run on weekdays @ 07h00
UTC, against a matrix of 6 grafana versions. Results of these builds
will be posted to `#irm-amixr-flux` Slack channel.
- local development will now be:
```bash
make build-dev-images init-k8s start-k8s
```
- `build-dev-images` - builds the engine and UI docker images (only need
to run first time)
- `init-k8s` - creates a `kind` cluster and loads the two Docker images
onto the cluster nodes (only need to run first time)
- `start-k8s` - switches `kubectl` context to the created `kind`
cluster, and uses `helm` to deploy everything as defined in
`./dev/helm-local.yml` and `./dev/helm-local.dev.yml` (that latter file
is `.gitignored` and specific to how _you_ want your setup to look like.
Hot reloading works as before. This is the _start_ of #2381. (I've
marked these `make` commands as beta, because they've not yet been
thoroughly tested for local development).
- modifies the `helm` chart to add the concept of `oncall.devMode`,
`ui`, and ability to run oncall w/ sqlite
- `oncall.devMode` will essentially just add `volumes` and
`volumeMounts` to the various engine/migrate containers +
- `ui.enabled` + `ui.env` - create a ui container (which is needed for
hot reloading locally)
- `sqlite` - this was useful for the e2e test environments where Github
runner resources are scarce. Running `mariadb` eats up precious
resources, instead lets just use sqlite here
- fixes an issue that caused sporadic HTTP 502s from the grafana
plugin-proxy, which led to flaky tests. See [this
comment](https://github.com/grafana/oncall/pull/2751/files#diff-09040e8df192699b9c5742110ebbe8d9d5c3938cb156cc1cb99fa1c3fdee4fefR72-R77)
for more context + a link to a relevant Slack conversation. **tldr;**
there is a bug with the Grafana plugin proxy in Grafana >= v10.0.3.
Let's stop using the `latest`/`main` docker tags in our test and pin to
`10.0.2` for now
- ~~re-enables the e2e test which validates a phone number via SMS, and
asserts that we can receive an alert escalation via SMS (new Mailslurp
API Key has been added as a repo secret)~~ update: this is still blocked
by procurement, will be done in a future PR
## Checklist
- [x] Unit, integration, and e2e (if applicable) tests updated
- [x] Documentation added (or `pr:no public docs` PR label added if not
required)
- [x] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
# What this PR does
Add [`yamllint`](https://github.com/adrienverge/yamllint) to
`pre-commit` configuration + fix pre-existing errors
## Checklist
- [x] Unit, integration, and e2e (if applicable) tests updated
- [x] Documentation added (or `pr:no public docs` PR label added if not
required)
- [x] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
# What this PR does
fixes a bug introduced in #2655 where the `topologySpreadConstraints`
helm values are not scoped correctly on the engine template.
## Which issue(s) this PR fixes
closes#2655
## Checklist
- [ ] Unit, integration, and e2e (if applicable) tests updated
- [ ] Documentation added (or `pr:no public docs` PR label added if not
required)
- [ ] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
Co-authored-by: Joey Orlando <joey.orlando@grafana.com>
Add a small note about the trailing slash for the OnCall Integration
URL.
# What this PR does
A user contacted Support because they were confused by the need for a
trailing slash for the alertmanager oncall integration url. This PR is
an attempt to briefly call out the trailing slash is required in an
effort to prevent user confusion in the future.
## Which issue(s) this PR fixes
## Checklist
- [ ] Unit, integration, and e2e (if applicable) tests updated
- [ ] Documentation added (or `pr:no public docs` PR label added if not
required)
- [ ] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
---------
Co-authored-by: Ildar Iskhakov <Ildar.iskhakov@grafana.com>
Co-authored-by: GitHub Actions <actions@github.com>
Co-authored-by: Vadim Stepanov <vadimkerr@gmail.com>
Co-authored-by: mallettjared <110853992+mallettjared@users.noreply.github.com>
Co-authored-by: Joey Orlando <joey.orlando@grafana.com>
Co-authored-by: Wei-Chin Call <wei-chin.call@grafana.com>
Co-authored-by: Joey Orlando <joseph.t.orlando@gmail.com>
# What this PR does
Adds support for defining extra containers which run as sidecar
alongside the celery and engine containers
## Which issue(s) this PR fixes
## Checklist
- [x] Unit, integration, and e2e (if applicable) tests updated
- [ ] Documentation added (or `pr:no public docs` PR label added if not
required)
- [x] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
# What this PR does
When configuring twilio auth only the provided values are templated.
## Which issue(s) this PR fixes
https://github.com/grafana/oncall/issues/2654
## Checklist
- [X] Unit, integration, and e2e (if applicable) tests updated
- [ ] Documentation added (or `pr:no public docs` PR label added if not
required)
- [ ] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
---------
Co-authored-by: Joey Orlando <joey.orlando@grafana.com>
Co-authored-by: Joey Orlando <joseph.t.orlando@gmail.com>
# What this PR does
Adds support for `topologySpreadConstraints` and `priorityClassName` on
the celerly/engine deployment templates
## Which issue(s) this PR fixes
https://github.com/grafana/oncall/issues/2655
## Checklist
- [X] Unit, integration, and e2e (if applicable) tests updated
- [ ] Documentation added (or `pr:no public docs` PR label added if not
required)
- [ ] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
Co-authored-by: Joey Orlando <joey.orlando@grafana.com>
# What this PR does
Adds support for custom annotations on the helm chart's migrate job
## Which issue(s) this PR fixes
https://github.com/grafana/oncall/issues/1618
## Checklist
- [X] Unit, integration, and e2e (if applicable) tests updated
- [x] Documentation added (or `pr:no public docs` PR label added if not
required)
- [ ] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
# What this PR does
Added 'resources limits' definition for wait-for-db container
## Which issue(s) this PR fixes
I face a problem: when i install OnCall by Helm, my pods with
oncall-engine and oncall-celery stuck on Init state, because they don't
have enough resources to run.
## Checklist
- [x] Unit, integration, and e2e (if applicable) tests updated
- [x] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
- [ ] Documentation added (or `pr:no public docs` PR label added if not
required)
---------
Co-authored-by: Joey Orlando <joey.orlando@grafana.com>
Co-authored-by: Joey Orlando <joseph.t.orlando@gmail.com>
# What this PR does
Add affinity and tolerations for celery
## Which issue(s) this PR fixes
## Checklist
- [x] Unit, integration, and e2e (if applicable) tests updated
- [ ] Documentation added (or `pr:no public docs` PR label added if not
required)
- [x] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
Co-authored-by: Joey Orlando <joey.orlando@grafana.com>
# What this PR does
## Which issue(s) this PR fixes
Grafana OnCall base_url is most likely the one to be used for Telegram
callback.
## Checklist
- [ ] Unit, integration, and e2e (if applicable) tests updated - Not
needed
- [X] Documentation added (or `pr:no public docs` PR label added if not
required)
- [X] `CHANGELOG.md` updated (or `pr:no changelog` PR label added if not
required)
- Enabling existing secrets for external MySQL and Redis
- Tolerate existing secrets for bundled charts.
- README.md: secrets handling explained.
- Fixed multiple bugs where missing required field was replaced with
default instead of failing.
- PHONE_NOTIFICATIONS_LIMIT was on the wrong level: it was not set if
existingSecret was true.
Next are the cosmetic changes. They improve chart consistency, e.g.
prevent generation of multiple new lines in certain cases:
- Common approach to spaces trimming. This typically allows curly blocks
and actual strings indentation and nice `nindent` usage:
- Two curly blocks should not trim the same space. I.e. "{{ ... -}} {{-
... }}" shouldn't happen.
- Template generates either single line or multiline string. In both
cases, no new line appears on both sides of the output string. So we
delete unnecessary new lines inside and at the end of string with
"trim-to-left" (`{{-` ) and the leading new line using "trim-to-right"
(`-}}`).
Note that trimming both leading and trailing new line is not always
easily possible: https://github.com/Masterminds/sprig/issues/357
Example.
```
{{- define "mytemplate" -}}
{{ if someBoolean -}}
{{ .Value.some }}
{{- else -}}
some string
{{- end }}
{{- end }}
```
- `template` replaced with `include`. It is often recommended to use
`include` by default, as it allows pipelining.
## Checklist
- [ ] Tests updated - No tests for Helm chart
- [X] Documentation added
- [x] `CHANGELOG.md` updated
Co-authored-by: Ildar Iskhakov <Ildar.iskhakov@grafana.com>
